Download Print this page

Operation - netvox R718PA22 User Manual

Ultrasonic fuel level meter
Hide thumbs Also See for R718PA22:

Advertisement

Compatible with LoRaWAN
Frequency hopping spread spectrum technology
 Configuration parameters can be configured through third-party software platforms
Data can be read and alerts can be set via SMS text and email (optional)
 Applicable to third-party platforms: Actility / ThingPark / TTN / MyDevices /
Cayenne

5. Operation

On/Off
Power on
Turn on
Turn off
(Restore to factory setting)
Power off
Note:
Network Joining
Never joined the network
(Or at factory setting )
Had joined the network
(Not at factory setting.)
Fail to join the network
(when the device is on)
Function Key
Press and hold for 5 seconds
Press once
Class A
TM
External 12V power supply
Press and hold the function key for 3 seconds till the green indicator flashes once.
Press and hold the function key for 5 seconds till the green indicator flashes for 20 times.
Remove power
st
th
1. At 1
-5
second after power on, the device will be in engineering test mode.
2. Remove and supply the power; the device is at off state by default.
Need turn on the device to use.
3. On/off interval is suggested to be about 10 seconds to avoid the interference of capacitor
inductance and other energy storage components.
Turn on the device to search the network.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Turn on the device to search the previous network.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
First two mins: wake up every 15 seconds to send request.
After two mins: enter sleeping mode and wake up every 15 minutes to send request.
Note: Suggest to remove batteries if the device is not used to save power.
Suggest to check the device verification information on the gateway
or consult your platform server provider.
Restore to factory setting / Turn off
The green indicator flashes for 20 times: success
The green indicator remains off: fail
The device is in the network: 87+ReceiveData
(ReceiveData is the most recently received data) format packet
The device is not in the network: the green indicator remains off
3

Advertisement

loading