Akaso Brave 7 LE User Manual page 14

EN
7. EV: -2.0/-1.0/0.0/+1.0/+2.0
Default setting is 0.
By default, your camera uses the entire image to determine the appropriate exposure
level. However, exposure lets you select an area that you want the camera to prioritize
when determining exposure. This setting is particularly useful in shots where an
important region might otherwise be over or underexposed.
8. Metering: Center/Multi
Default setting is Multi.
The metering mode refers to the way in which a camera determines exposure.
9. Date Stamp: Off/Date/Date&Time
Default setting is Date&Time.
Turn on Date Stamp, this camera adds date stamp to the videos and photos you
take.
Photo Setup
1. Photo Resolution: 20MP/16MP/14MP/10MP/8MP/5MP/2MP
Default setting is 20MP.
2. Image Quality: High/Middle/Low
Default setting is High.
3. ISO: Auto/100/200/400/800/1600/3200
Default setting is Auto.
ISO determines the camera's sensitivity to light, and creates a trade-off between
brightness and resulting image noise. Image noise refers to the degree of graininess
in the image. In low light, higher ISO values result in brighter images, but with greater
image noise. Lower values result in lower image noise, but darker images.
12