Sledeći koraci
1. Ponovo postavite
poklopac osnove
2. Ponovo postavite
SD memorijsku karticu
3. Sledite proceduru u odeljku
Čvrsti disk
Removing the hard drive assembly
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Disconnect the
battery
Steps
1. Disconnect the hard drive cable from the system board [1].
2. Peel the tape that secures the hard drive cable to the system board [2].
3. Remove the four (M2x4.5) screws that secure the hard drive assembly to the palmrest and keyboard assembly [1].
4. Lift the hard drive from the slot on the palmrest and keyboard assembly [2].
24
Uklanjanje i instaliranje komponenti
Posle rada u unutrašnjosti računara
before working inside your computer
cable.