Płyta Io - Dell Latitude 3400 Service Manual

Hide thumbs Also See for Latitude 3400:

Table of Contents

Available languages

Next steps

1. Replace the

battery

cable.

2. Replace the

base cover

3. Replace the

SD memory card

4. Follow the procedure in

Płyta IO

Removing the IO board

Prerequisites

1. Follow the procedure in

2. Remove the

SD memory

3. Remove the

base

cover.

4. Remove the battery.

5. Remove the

hard drive

NOTE:

Required for systems with 42 Whr battery

Steps

NOTE:

Removing the I/O board also removes the coin-cell battery which resets the CMOS settings.

Open the latch and disconnect the I/O board cable from the system board [1].

2. Peel the I/O-board cable from the palm rest and keyboard assembly [2].

3. Remove the two (M2x3) screws that secure the I/O board to the palm rest and keyboard assembly [1].

4. Lift the I/O board, along with the cable, off the palm rest and keyboard assembly [2].

Wymontowywanie i instalowanie komponentów

after working inside your computer

before working inside your

card.

assembly.

computer.

Table of Contents

P111g