Wskaźnik Led Stanu Akumulatora - Dell Latitude 3400 Service Manual

Hide thumbs Also See for Latitude 3400:
Table of Contents

Advertisement

Available languages

Available languages

NOTE:
The diagnostic pattern consists of a two-digit number being represented by a first group of LED blinks (1–9) in
amber, followed by a 1.5 s pause with the LED off, and then a second group of LED blinks (1–9) in white. This is then
followed by a three second pause, with the LED off, before repeating over again. Each LED blink takes 0.5 s.
The system will not shut down when displaying the Diagnostic Error Codes.
Diagnostic Error Codes always supersede any other use of the LED. For instance, on Notebooks, battery codes for Low Battery or Battery
Failure situations will not be displayed when Diagnostic Error Codes are being displayed.
Table 6. Diagnostic LED
Blinking Pattern
Amber
White
2
1
2
2
2
3
2
4
2
5
2
6
2
7
2
8
3
1
3
2
3
3
3
4
3
5
3
6
3
7
Wskaźnik LED stanu akumulatora
Tabela 7. Wskaźnik LED stanu akumulatora
Źródło zasilania
Zasilacz sieciowy
Zasilacz sieciowy
Zasilacz sieciowy
Akumulator
Akumulator
Akumulator
106
Troubleshooting
Possible Problem
CPU failure
System Board failure (included BIOS corruption or
ROM error)
No Memory/ RAM detected
Memory/RAM failure
Invalid memory installed
System board/Chipset Error/Clock failure/Gate A20
failure/Super I/O failure/Keyboard controller failure
LCD failure
No power supply to the LCD due to LCD power rail
failure
RTC power failure
PCI or Video card/chip failure
BIOS Recovery image not found
BIOS Recovery image found but invalid
EC ran into power sequencing failure.
Flash corruption detected by SBIOS
Timeout waiting on ME to reply to HECI message
Zachowanie lampki
Ciągłe białe światło
Ciągłe białe światło
Nie świeci
Światło bursztynowe
Nie świeci
Nie świeci
Suggested Resolution
Replace the system board.
Flash latest BIOS version. If problem persists,
replace the system board.
Confirm that the memory module.. is installed
properly. If problem persists, replace the memory
module
Replace the memory module.
Replace the memory module.
Replace the system board.
Replace the LCD.
Replace the system board.
Replace the CMOS battery.
Replace the system board.
Flash latest BIOS version. If problem persists,
replace the system board.
Flash latest BIOS version. If problem persists,
replace the system board.
Flash latest BIOS version. If problem persists,
replace the system board.
Flash latest BIOS version. If problem persists,
replace the system board.
Flash latest BIOS version. If problem persists,
replace the system board.
Stan zasilania systemu
S0
S4/S5
S4/S5
S0
S0
S4/S5
Poziom naładowania
akumulatora
0–100%
< Całkowicie naładowany
Całkowicie naładowany
< = 10%
> 10%
0–100%

Advertisement

Table of Contents
loading

This manual is also suitable for:

P111g

Table of Contents