Page 1
JK Audio Daptor Two Wireless Phone Adapter User Guide Telephone Interface Products...
Page 2
Description Simply plug Daptor Two into the 2.5 mm headset jack of any wireless cell phone that accepts a third party headset or earpiece. You can now send and receive audio from your mixer or tape recorder through the cell phone.
Page 3
Connect the enclosed audio adapter cord between Daptor Two and your wireless phone’s headset jack. Your wireless phone should now recognize Daptor Two as a headset and disable the phone’s mic and earpiece. Now connect either the XLR or 1/4” input and output to your mixer or tape recorder.
Page 4
While some wireless phones have the 2.5 mm jack directly on the phone, others require a headset adapter which converts their proprietary connector into the 2.5 mm jack. JK Audio does not supply these adapters. You must contact your wireless dealer or your local electronics store to purchase these adapters.
However, due to the unpredictable nature of wireless telephone service we cannot guaranty excellent audio quality every time Daptor Two is used. Audio quality is still mostly dependent upon the connection provided by your wireless telephone service. As a general rule, the better the cell phone signal, the better your audio quality will be.
Warranty The model Daptor Two is covered by a 2 year warranty to be free from defective workmanship and materials. In the event that the Daptor Two needs repair, you must call us to get an authorization, and then carefully pack and ship it to us. You will pay for shipping to us and we will pay for return back to you, UPS ground.