Removing Excess Humidity - Samsung SC09AWHX Owner's Instructions Manual

Removing Excess Humidity

If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
1 If necessary, press the
◆ The operation indicator on the indoor unit lights up.
Result:
◆ The air conditioner starts up in the mode selected when
the unit was last used.
◆ The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
It will start up normally after three minutes.
2 If the is not displayed at the top of the remote control, press the
button on the remote control one or more times until it appears.
◆ The indoor unit beeps each time you press the
Result:
◆ The air conditioner runs in the Dry mode.
N N o o t t e e You can change modes at any time.
N N o o t t e e
3 To adjust the temperature, press the
until the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
◆ Each time you press the
Result:
- The temperature is adjusted by 1°C
- The indoor unit beeps
◆ The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
4 To control the direction of the air flow, refer to page 15.
button.
button one or more times
button:
button.
11
E-