Connect The Drain Hose; Connect Power Plug - LG WM3997H A /01 Series Service Manual

HOW TO CONNECT THE INLET HOSE
Verify that the rubber washer is inside of the
valve connector.
Tighten the inlet hose securely to prevent leaks.
Install the inlet hose to correct temperature
water tap.
Otherwise, it cause drips on the drawer panel
handle and drawer panel.

CONNECT THE DRAIN HOSE

• Make sure that the hose is not twisted.
The end of the drain hose should be placed less than 96" from the floor.

CONNECT POWER PLUG

• Connect the power plug to the wall outlet.
LGE Internal Use Only
• Avoid submerging the end of the hose.
• Avoid connecting several electric devices,
as doing so may cause a fire.
Copyright © 2016 ~ 2017 LG Electronics Inc. All rights
11
reserved. Only training and service purposes.
Hot
Cold