Charge & Charge Hr; Flex; Surge - Fitbit Zip Flex 2 Quick Start Manual

Charge & Charge HR
1. Plug your charging cable into the USB port on your computer or any UL-certified USB
wall charger.
2. Insert the other end into the port on the back of your Fitbit Charge or Fitbit Charge HR.
Your tracker will begin charging.
3. Press and hold the button for 10 to 12 seconds until you see the Fitbit icon and a version
number (e.g. "V30").
4. Let go of the button.
5. Unplug your tracker from the charging cable.
Your tracker should now work normally. If your tracker still doesn't work after a restart, contact
Customer Support.

Flex

1. Plug your charging cable into a USB port on your computer or any UL-certified USB
wall charger.
2. Remove the pebble from the band and insert it into the charging cable.
3. Insert a paperclip into the small pinhole on the back of the charger.
4. Press on the pinhole for 3-4 seconds.
5. Take your tracker out of the charger and insert it back into the band.
Your tracker should now work normally. If your tracker still doesn't work after a restart, contact
Customer Support.

Surge