Setting Up Fibo; Calibration; Order Of Calibration - Promet FiBO 200 Quick Start Manual

FiBO® Model 200

Setting Up FiBO

1. Connect FiBO directly to the computer
using the supplied USB cable. FiBO
must have a dedicated USB 3.0 port.
Do not use a USB hub.
2. Plug the A end of the cable into a USB
3.0 compliant port.
3. Plug the B end of the cable into FiBO
4. Note that demo/older FiBO systems
may use USB 2.0

Calibration

In order to have proper measurements, the FiBO hardware must be calibrated using the included set of
three calibration targets.
Do not touch the surface of the central portion of the alignment
target. It is delicate and can easily be damaged.

Order of Calibration

The order of calibration for the FiBO 200 is as follows:
 Phase Shift
 2D
 3D
 Apex Offset
For a detailed description of this important process, please reference the FiBO 200 User's Guide
section of "Calibration Targets".
Promet Optics
4
QS V 3.1 05/17