Advertisement
FiBO® Model 200
Measurement Setup
1. Select the appropriate adapter (e.g., FC, FC/APC, ST, SC, 1.25mm, 2.5mm) for your application.
2. Place the adapter onto the kinematic mount. Confirm the alignment arrow is facing away from
the front of the FiBO
3. Insert the connector completely into the adapter. If applicable, align the key to the adapter's
keyway.
For detailed information on taking measurements and viewing results, please reference the
FiBO 200 User's Guide sections "Fiber Measurements Techniques and Parameters", "Fiber
Connector Measurements" and Viewing Measurement Results".
For customer support, please call 651-481-9661 or email
Promet Optics
Attaching a Connector Adapter to FiBO
Inserting a Connector
5
FiBO@prometoptics.com
QS V 3.1 05/17
Advertisement
