Advertisement
FiBO® Model 200
What's In the Box
FiBO 200 Interferometer
FiBO Code™ ™ software
Calibration targets
USB 3.0 cable
Rugged case
Flash drive with manual & FiBO Code Installer
Software & Device Driver Installation
Do not attach the FiBO device until all software and device driver
installations are complete!
Software Installation
1. Double-click the FiBO Code™ icon to open the FiBO Code™ Installer
Windows User Account Control requires you to authorize the installation of the software on the
computer.
2. Click Yes to open the installation program for the FiBO Code™.
3. Click Next > to begin the FiBO Code™ installation.
4. Click I Agree to accept the terms of the Software End User Licensing Agreement
5. .Choose the Install Location for the software. The default is indicated under the Destination
Folder. If you wish to change the installation location, select Browse... and select the preferred
location.
6. Click Next > to continue the installation process.
7. Choose the Start Menu Folder. PROMET International\FiBO Code™ 3.0 is the default location.
You can type in a different name for the folder, if preferred.
8. Click Next > to continue installation.
9. Verify the locations from the previous steps. Click Install to continue. If you want to make
changes, click < Back to return to the previous screen and enter your change.
10. To create a desktop shortcut, click Next >. If you do not want a desktop shortcut, uncheck the
box and then click Next >.
Promet Optics
2
QS V 3.1 05/17
Advertisement
