Contents 1. Product Series & Lists 1. Product Series & Lists ------------------------------------ 2 1.1 USB Cameras 2. Camera Interface Specification------------------------- 4 - FL ooled Camera Cooled Camera USB3.0 Camera USB2.0 Camera GT Camera 3. Use in PC Mode--------------------------------------------- 6 - 3.1 Camera Installation-------------------------------------- 6 - Overviews 3.2 System Configuration------------------------------------ 7...
Page 3
2. Camera Interface Description 1.2 HDMI Cameras 2.1 Cooled Camera 2.1 FL Cooled Camera HD1500MET-AF HD1500MET-M HD1000-LITE TrueChrome AF TrueChrome Metrics HD Lite ① * External trigger interface ④ Indicator light ① ② USB3.0 ⑤ Power switch ③ Power interface ②...
3. Use in PC Mode 2.4 HDMI Cameras ⑤ ③ ① USB ② HDMI ③ Power ① 3.1 Camera Installation ② ⑥ ⑤ Indicator light ⑥ SD card slot ④ ON/OFF ④ In PC mode, connect the camera to the computer with a USB cable and use the software to control the camera.
② Go to the Device Manager and check whether the driver is installed properly. If ② Go to the Device Manager and check whether the driver is installed properly. If ② Go to the Device Manager and check whether the driver is installed properly. If ②...
① Under the biological mode, software defaults automatic white balance: 3.4 Software Settings Conduct white balance calculation by moving samples under microscope to empty 1).Basic Settings space, and then select [Lock White Balance] to complete white balance calibration operation;Under the industrial mode, by opening white balance options, regional Resolution ①...
Page 7
4).Image Acquisition Hitogram ⑦ Flie Save ① Use Dialog ② Use File Name yyyymmddHHMMSS File Name: ⑧ DICOM Auto Min Auto Max Format: √ Browse C:/Users/tuc/Desttop/Image ⑨ Path: Gamma: 2.10 Video Record ③ Encoder: Line Full frame(No compression) Default ④ Auto Stop Total Frame:...
4. Use in HDMI Mode 4.2 Basic Use 1. After the connection is completed, press ON/OFF key until the blue light is on and 4.1 Camera Installation the moving cursor appears on the screen. 2. When the cursor is moved to the left of the screen, “Capture” and “Setting” icons will appear.
Page 9
4. Right-click to enter the calibration and measurement module. 1 Scale Bar On/off the scale bar on the picture. 2 Coordinate Get the coordinates of the selected points. 3 Line Arbitrary, horizontal and vertical line measurement. 4 Freehand Line Get a freehand line length. Measure rectangle perimeter and area.
6. Maintenance 5. Precautions 1. Avoid removing the lens cap in a dusty environment. 2. When removing the lens cap or mounting a lens, hold the camera face down to CAUTION prevent dust from falling on the sensor surface. 3. When the camera is not being used, the lens cap should be replaced. 4.
Need help?
Do you have a question about the HD1500MET-AF and is the answer not in the manual?
Questions and answers