Advertisement
HD1000LITE and HD1000LITE-M – Meiji Techno
America HDMI /USB 2.0 Series- Quick Start Guide
The HD1000LITE color camera -- another milestone in Meiji Techno scientific camera series. Amazing
color fidelity offers real solutions for high definition scientific color imaging. As the standard USB2.0
camera, it also can connect to monitor with HDMI port directly, without needing a PC. Users can operate
it easily and capture images to the SD card directly. HD1000LITE is perfectly suitable for life science,
clinical medicine and material science, etc.
Features
HD1000LITE
Perfect Color Fidelity
1080p 60fps Full Frame Rates
HDMI Fluorescence Imaging Capability
Exposure time up to 10 seconds
Install
1. Use the 12V2A power supply. Use the HDMI cable to connect the camera to the monitor, and press
ON/OFF key to switch on the camera.
2. Connect a mouse to the USB port to control the camera directly.
3. Insert SD card, the images and video will be saved in the SD card.
HD1000LITE HDMI installation
Advertisement
Table of Contents
Related Manuals for Meiji Techno HD1000LITE
Summary of Contents for Meiji Techno HD1000LITE
- Page 1 HDMI port directly, without needing a PC. Users can operate it easily and capture images to the SD card directly. HD1000LITE is perfectly suitable for life science, clinical medicine and material science, etc.
- Page 2 2. Use USB2.0 cable to connect the camera to the PC .Use ISCapture software to control it. HD1000LITE 1. Start the software and get the camera recognized, but the preview is all black.
- Page 3 If you install third-party antivirus software and firewall software, antivirus software and firewall software will delete DLL Dynamic link library file automatically and result in software file is missing. In this case, if the system prompted you to isolate or delete, you should need to choose to ignore this operation or open the anti-virus software to trust it. 7.
- Page 4 Completely remove the TCapture, reboot the PC and then right-click on TCapture installer (TCapture Setup.exe) and select ‘ Run as Administrator’ to install the TCapture. When firstly start the software, please also right-click on the TC icon and select ‘Run as Administrator’ to start it. 16.
Need help?
Do you have a question about the HD1000LITE and is the answer not in the manual?
Questions and answers