Meiji Techno SI-C600N Operating Manual

1/2-inch miniature color camera

Advertisement

Quick Links

1/2-inch Miniature Color Camera
SI-C600N/SI-C600P
OPERATING MANUAL
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REFER SERVICING TO QUALIFIED SERVICE PERSONAL.
This lightning flash with arrowhead
symbol is intended to alert the user to
the presence of uninsulated "danger-
ous voltage " within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
This exclamation point symbol is
intended to alert the user to the
!
presence of important operating
and maintenance (servicing) instruc
-tions in the literature accompanying
the appliance.
Due to design modification, data given in this
instruction book are subject to possible change
without prior notice.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
1
For Customer Use :
Please record the model No. and the serial No.
in th e spaces provided below. These numbers
located on the bottom of the camera.
Retai n this information for future reference.
Model No.
WARNING :
TO PREVENT THE RISK OF FIRE OR
ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS CAMERA TO RAIN OR
MOISTURE.
Information for USA
This device complies with Part 15 of the
FCC Rules.
Changes or modifications not approved by
COSTAR could void the user's authority to
operate the equipment.
Serial No.
!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SI-C600N and is the answer not in the manual?

Questions and answers

Summary of Contents for Meiji Techno SI-C600N

  • Page 1 1/2-inch Miniature Color Camera SI-C600N/SI-C600P OPERATING MANUAL For Customer Use : Please record the model No. and the serial No. in th e spaces provided below. These numbers located on the bottom of the camera. Retai n this information for future reference.
  • Page 2: Table Of Contents

    Thank you for purchasing this color video camera. Before using this camera, please read this operation manual carefully to obtain the best result and keep this manual for future reference. C C C C O O O O N N N N T T T T E E E E N N N N T T T T S S S S SAFETY INSTRUCTIONS .
  • Page 3: Precautions

    PRECAUTIONS ● Do not install the camera where the tempera- Operating ture could exceed the allowable range. ● Before using make sure of power supply and Be sure the ambient temperature is less than connection of video output. 40 ℃ in installations intended for long term Power supplied without voltage stabilization or continuous operation.
  • Page 4: Name And Functions

    NAME AND FUNCTIONS Lens mount Back-focus screw Mount for installing the lens. C-mount lens A screw is provided to fix the lens can be used when C-mount adapter is at- mount. See page 24. tached, and CS-mount lens can also be used when it is removed.
  • Page 5: Menu System

    Lens Connector DC type lens ; Connect the ens cable of a DC (galvanomet- ric) type lens. If the plug on the cable is of a different type, replace it with the provided 4- pin iris plug. Damping coil (-) Drive coil (+) ①...
  • Page 6: Menu Description

    Menu Description Lens (page 11) SETUP MENU ● AUTO (page 11) ● MANUAL MOTION Shutter/AGC BACK PICT WHITE DETECTION BALANCE LIGHT ADJUST (page 15) (page 12) (page 14) (page 15) (page 13) (page 16) ● ATW ● OFF ● MIRROR ●...
  • Page 7: Shutter/Agc

    SHUTTER/AGC MANUAL Mode When using the ris lens, the brightness of Manual I 1) Press the Set Button to display the Setup menu. the picture image will be controled by setting the 2) Position the cursor at SHUTTER/AGC and press shutter level.
  • Page 8: Backlight

    BACKLIGHT HLC Mode Two backlight modes can be selected according to High light compensation is a function that improves conditions. the visual recognition of license plates and other SETUP MENU such objects by suppressing or marsking strong light LENS AUTO sources(such as headlights of automobiles) in dark SHUTTER/AGC AUTO...
  • Page 9: Motion Detection

    MOTION DETECTION By using the motion detection function, it is possible MONITOR AREA : Sets whether to use the moni to create surveillance cameras which are capable -toring frames. of detecting moving objects. AREA SEL : Selects the monitoring frame to be set. The motion detection function identifies motion and TOP : Sets the top side of the monitoring frame.
  • Page 10: Noise Reduction

    AUTO Mode : BW Mode : 1) Position the cursor at Day/Night and press the left 1) Press the Set button only when position the cursor or right button to change the Day/Night mode. at BW to adjust the BW mode control. 2) Press the Set button only when position the cursor at Auto to adjust the Day/Night function control.
  • Page 11: Sync

    SYNC (Internal Only) LANGUAGE This function is used to display the current synchro The OSD menu displays support 7 languages ; -nization mode. English, Japanese, German, French, Russian, Spanish When the line lock mode is being used as the and Portuguese. synchronization mode, it is possible to adjust the Position the cursor at LANGUAGE and press the phase in the vertical direction.
  • Page 12: Installation (Lens)

    INSTALLATION (LENS) Pin assignment : S-VIDEO connector (4-pin) Pin No. Signal ■ ■ ■ ■ Please attach a lens cable Y (Luminance, when using the DC iris lens 1Vp-p, 75 Ω ) C (Chrominance, 0.286Vp-p, 75 Ω ) Mounting a lens ●...
  • Page 13: Back-Focus Adjustment

    Back-focus adjustment WITH A ZOOM LENS When a lens is mounted, adjustment of the 1) Fully open the aperture and set the lens to the back-focus may sometimes be required. Adjust maximum tele-photo position. Then turn the focus the lens ring to focus.
  • Page 14: Installation (Camera)

    INSTALLATION (CAMERA) Installation ● Camera can be installed on a tripod or a fixing part from the upper plate or the bottom plate by using the camera fixing holes (1/4", 20UNC) on the tripod mounting base. The tripod mounting base has been installed on the bottom plate when shipped from factory.
  • Page 15: Specifications

    SPECIFICATIONS AGC range 6dB~44.8dB(Manual) Signal system SI-C600N : NTSC Shutter speed range 1/60(1/50)~1/100,000sec SI-C600P : PAL Manual shutter speed Pickup element 1/2" Sony IT CCD 1/60(1/50), 1/120, 1/250, Effective pixels 1/500, 1/1000. 1/5000, SI-C600N 768(H) 494(V) 1/10000,1/50000 sec SI-C600P 752(H)
  • Page 16: Memo

    MEMO...

This manual is also suitable for:

Si-c600p

Table of Contents