ABB Ability Smart Sensor Installation Manuallines page 4

Step 4
Use a hammer with a rubber or plastic head to insert
the mounting wedge until the end of the wedge touches
the frame of the motor.
If the installation is done in a Zone 0 or Zone 20
environment, the grounding connection should be
verified at this stage by measuring the resistance
between the mount and the frame of the motor. The
resistance should be less than 100 Ω.
Step 5
Press the putty firmly to the mount to ensure that the
installation is robust.
CAUTION: ALLOW PUTTY TO DRY FOR 10 MINUTES
BEFORE MOVING ON TO STEP 6 TO MAKE SURE
THAT THE INSTALLATION IS ROBUST. THE AMBIENT
TEMPERATURE AND THE SURFACE TEMPERATURE
MUST BE WITHIN 15 °C – 35 °C (59 °F – 95 °F) FOR
THE PUTTY TO CURE.
Step 6
Fasten the ABB Ability™ Smart Sensor to the wedge
mount by using the M6 hexagon socket screw.
Tighten the screw with maximum 10 Nm (7.4 ft-lb) of
torque. Make sure to hold the sensor while tightening
the screw to avoid exerting torque on the glue.
Make sure that the ABB Ability
mounted parallel to the rotating shaft by aligning it
with the motor fins. Assemble the screw hole cover to
hide the screw hole.
Step 7
Activate the sensor by turning on the smartphone's
NFC and tap the left side of the sensor with the smart-
phone. Digitally connect the sensor by using the ABB
Ability™ Smart Sensor Platform App. Log in using your
ABB credentials and navigate to the "Commission
new asset" menu, to pair the Smart Sensor to the
asset to be monitored.
NOTE: After commissioning, the sensor has a two-
month trial period during which the user has full
access to Smart Sensor data and web services.
After the trial period, the usage can be continued by
activating a subscription acquired from a local ABB
sales unit or from ABB Ability Marketplace
check with your local ABB partner if the ABB Ability
Marketplace
—
For questions, feedback and support, please contact:
Product information
www.abb.com/smartsensor
Support
support.smartsensor@abb.com
Subscriptions
https://eu.marketplace.ability.abb/
Smart Sensor is
TM
is available in your region.
TM
—
We reserve the right to make technical
changes or modify the contents of this
document without prior notice. With re-
gard to purchase orders, the agreed par-
ticulars shall prevail. ABB Ltd does not ac-
cept any responsibility whatsoever for
potential errors or possible lack of infor-
mation in this document.
. Please
TM
We reserve all rights in this document and
in the subject matter and illustrations con-
tained therein. Any reproduction, disclo-
sure to third parties or utilization of its
contents – in whole or in parts – is forbidden
without prior written consent of ABB Ltd.
Copyright© 2020 ABB
All rights reserved