Makita HP0300 Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Drill
  5. HP0300
  6. Instruction manual

Makita HP0300 Instruction Manual

Hammer driver drill
Hide thumbs Also See for HP0300:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Hammer Driver Drill
HP0300
Read before use.
DOUBLE INSULATION

Advertisement

Table of Contents
loading

Related Manuals for Makita HP0300

Summary of Contents for Makita HP0300

  • Page 1 INSTRUCTION MANUAL Hammer Driver Drill HP0300 Read before use. DOUBLE INSULATION...

  • Page 2: Specifications

    SPECIFICATIONS Model: HP0300 Drilling capacities Masonry 8 mm Steel 10 mm Wood 28 mm Fastening capacities Wood screw 5.1 mm x 63 mm Machine screw No load speed (RPM) High (2) 0 - 1,500 min Low (1) 0 - 450 min...

  • Page 3: Ec Declaration Of Conformity

    When operating a power tool outdoors, use an WARNING: The vibration emission during actual extension cord suitable for outdoor use. Use of a cord use of the power tool can differ from the declared val- suitable for outdoor use reduces the risk of electric shock. ue(s) depending on the ways in which the tool is used If operating a power tool in a damp location especially what kind of workpiece is processed.
  • Page 4 Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Follow instruction for lubricating and chang- ing accessories. Hammer driver drill safety warnings Wear ear protectors when impact drilling.

  • Page 5: Functional Description

    FUNCTIONAL CAUTION: Always check the direction of rotation before operation. DESCRIPTION CAUTION: Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may dam- CAUTION: Always be sure that the tool is age the tool.
  • Page 6 Selecting the action mode CAUTION: Always set the ring correctly to your desired mode mark. If you operate the tool with the ring positioned halfway between the mode marks, the tool may be damaged. CAUTION: When you change the position from "...

  • Page 7: Operation

    Installing driver bit holder ASSEMBLY Optional accessory CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Installing or removing driver bit/drill bit CAUTION: After inserting the driver bit/drill bit, make sure that it is firmly secured. If it comes out, do not use it.

  • Page 8: Drilling Operation

    To maintain product SAFETY and RELIABILITY, ► 1 . Blow-out bulb repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service After drilling the hole, use the blow-out bulb to clean the Centers, always using Makita replacement parts. dust out of the hole.

  • Page 9: Replacing Carbon Brushes

    ► 1 . Brush holder cap OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
  • Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885728-225 www.makita.com 20190420...

Table of Contents