Table of Contents
Advertisement
5. Troubleshooting
3. Make sure you are working with the correct hardware model. To view/change the
hardware model in use, choose inDART-HCS12 > MCU Configuration from the
CodeWarrior HC(S)12 debugger's main menu.
4. If the inDART-HCS12 menu is not present in the CodeWarrior HC(S)12 debugger's
main menu, this is because the target has not been recognized by CodeWarrior ("No
link to Target" appears in the status bar). In this case, from the GDI menu, choose MCU
Configuration and verify that the hardware code is set correctly.
Stepping Execution is Slow
When the Memory window is open, step commands may execute slower, since the Memory
window contents need to be refreshed after every step.
Getting Technical Support
Technical assistance is provided free to all customers. For technical assistance,
documentation and information about products and services, please refer to your local
SofTec Microsystems partner.
5
SofTec Microsystems offers its customers a free technical support service at
support@softecmicro.com. Before getting in contact with us, we advise you to check that
you are working with the latest version of the PK-HCS12E128 system software (upgrades
are available free of charge at http://www.softecmicro.com). Additional resources can be
found on our HCS12 online discussion forum.
Page 36
Advertisement
Table of Contents
Need help?
Do you have a question about the PK-HCS12E128 and is the answer not in the manual?