Cooking / Reheating - Samsung CM1619 Owner's Instructions And Cooking Manual

Cooking / Reheating

Make sure the oven is plugged into a properly earthed electrical outlet
and "ON" appears in the display window.
Open the door(The oven lamp will be turned on.).
Put the food into a suitable container, place it in the centre of the oven
and then close the door securely (The oven lamp will go off.).
1. Select the desired power level by rotating the COOKING
POWER CONTROL DIAL.
Result :
2. Set the desired heating time by rotating the TIMER DIAL.
Result :
3. Press button:
Result :
When all time is elapsed, the end of cycle Beep
Tone will sound 4 times and all heating will stop.
The oven lamp will go off. For 1 min, the display
shows '0' and the cooling fan will keep working in
order to cool down the interior parts.
During the time, the fan will not stop even when
you open the door. 1 min later it will stop and
"ON" appears again. Food may be removed from
oven whilst the fan is still running.
4. Open the door and take the food out.
Close the door. The oven lamp will go off.
The selected power level will be displayed in
the display window.
"ON" blinks and the selected time is displayed
in the display window.
The oven lamp and cooling fan will be turned
on. Heating will start.
The time on digital display will count down.
Whilst heating, one press on
by pressing the pad or a second press on
selected program. When it is NOT in a heating cycle, one tap on
pad cancels the selected program. You can set the power level first
and then the cooking time next, or vice versa. You can press +20sec
button one or more times in order to add the cooking time by 20
seconds.
When heating cycle is completed and you open the door, the oven
lamp automatically turns on and goes off 1 min later.
When you open the door whilst in a heating cycle, the oven stops
operating and the oven lamp automatically turns on for 1 min and
goes off 1 min later. If you leave the oven door open for more than 1
min, the oven beeps once every minute and after 5 min the power
source check indicator 'ON' appears in the display window.
When in a heating cycle, you can not change the power level or
heating time. But you can add 20 sec increments using the +20sec
pad. The dial may be rotated but this does not affect the current
operation and the display remains the same. It becomes effective next
time you set the oven manually after you finish the current heating. If
you want to change the current setting, firstly stop the heating by
using CANCEL pad and set desired power level and cooking time
again.
But when you are NOT in a heating cycle, you can change the power
level and heating time. Changed values are promptly shown in the
display.
The oven is designed not to work when power level is set to "0" mode
between the heating mode and the defrosting mode.
When you first plug in the power cord, the oven beeps once and all
the indicators show for 5 sec in the display window.
5
pad stops the oven. You can restart it
pad will cancel the
GB