2. Remove 6 screws as shown in the figure.
3. Place the Bracket-plate to join the two units.
GB
4. Attach and tighten 6 screws as shown in the figure here.
5. Ensure the top oven is at a safe and workable height.
Bracket-Plate
Replacement of Lamp
Important
1. Remove a screw securing the lamp cover.
2. Remove the lamp by rotating it clockwise.
3. Replace with a new lamp by rotating it counter-clockwise.
Screw
10
You don't need to remove outer panel to replace lamp.
Lamp
Lamp Holder
Cover
Outer
Panel
Lamp
(230V 25W)