Summary of Contents for brondell FreshSpa Comfort+
Page 1
PRODUCT INFORMATION Product Parts Bidet Attachment 4. Cold Water Braided Metal Hose 2. Adjustable Mounting Brackets 5. Large Rubber Washers (2) 6. Teflon Tape 3. Cold Water T-Valve Connector (7/8" x 7/8" x 3/8")
Page 2
PRODUCT INSTALLATION Before Installation IMPORTANT Please be advised that the provided cold water T-valve should be installed at the fill valve under the toilet tank, and NOT at the cold water supply coming from the wall. Check Water Supply Line Check the water supply line that connects the toilet tank fill valve to the water shutoff valve at the wall.
Page 3
PRODUCT INSTALLATION Installation Please read these instructions carefully before installing your FreshSpa Comfort+. Failure to do so could result in flooding, leaking or damage to the product. 1. Existing Toilet Seat Removal a. Lift hinge covers and use flathead or Phillips head screwdriver to remove the mounting bolts.
Page 4
PRODUCT INSTALLATION Installation Installing the Bidet Attachment 1. Install Adjustable Mounting Brackets into the Bidet Attachment. Place circular mounting brackets into the circular openings of the bidet attachment. 2. Install Bidet Attachment on Toilet a. Place bidet attachment on the toilet so the nozzle is as close to the back of the toilet bowl as it will go.
Page 5
PRODUCT OPERATION Using the FreshSpa Comfort+ To engage the front wash setting, turn the dial counterclockwise towards the “FRONT” wash zone. • The further the dial is turned, the higher the water pressure will be. • To lower the water pressure, turn the nozzle back towards the center.
Need help?
Do you have a question about the FreshSpa Comfort+ and is the answer not in the manual?
Questions and answers