Symptom
The vacuum cleaning
robot frequently
collides with the
autoemptier.
The auto-emptier
does not empty
the dustbin
automatically.
The suction power of
the auto-emptier is
week.
The vacuum cleaning
robot is not charged.
Checklist
•
Check whether the autoemptier
•
Check whether there is a foreign
substance on the fi lter.
•
Check whether there is a foreign
substance inside the dustbin.
•
The bottom of the autoemptier is
clogged.
•
Check whether the dustbin
cyclone cap exists.
•
Check whether the auto empty
lamp of the auto-emptier is turned
on.
•
Check whether the dustbin is
separated from the autoemptier.
•
Check whether the fi lter is
separated from the autoemptier
dustbin.
•
Check whether the Power
Brush wrapped in any foreign
substances.
•
Check whether the Full lamp is
turned on.
•
Check whether the air inlet is
clogged by a foreign substance.
•
Check whether dust has collected
on the fi lter.
•
Check whether dust or hairs have
collected on the cyclone.
•
Check whether there is a foreign
substance on the charging
terminals.
•
Check whether the autoemptier is
turned on.
Measure to Take
•
Turn on the power switch on the
left side of the autoemptier.
•
Plug the power plug into the outlet.
•
Clean the fi lter.
•
Remove the foreign substance
from the inside of the dustbin.
•
Open the bottom of the auto-
emptier using a coin and then
remove the dust clogging it.
•
Close the dustbin cyclone cap.
•
Press the Auto Empty On/Off
Select button on the auto-emptier.
•
Turn off the auto-emptier and then
insert the dustbin fully until it is
mounted completely.
•
Turn off the auto-emptier and then
mount the fi lter onto the dustbin.
•
Remove any foreign substances
such as long hairs or strings
wrapped around the power brush.
•
Empty the dustbin.
•
Clean the air inlet of bottom.
•
Remove the foreign substance
from the air inlet.
•
Clean the fi lter.
•
Open the cyclone cap and then
remove any dust and hair.
•
Remove the foreign substance
from the charging terminals.
Turn on the power switch of the
auto-emptier.
troubleshooting _49