Related Manuals for Samsung VC-5913
Summary of Contents for Samsung VC-5913
-
Page 1: Operating Instructions
Operating Instructions VACUUM CLEANER Before operating this unit, please read the instructions carefully. -
Page 2: Important Safeguards
FEATURES Features include automatic cord rewind and dust indicator. NOTE : Not all models have the same features. IMPORTANT SAFEGUARDS 1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. 2. -
Page 3: Identifications Of Parts
HANDLE AIR REGULATOR TUBE* FLOOR NOZZLE* A TYPE *BELT-STRAP ASSY B TYPE Features marked may vary according to model. IDENTIFICATIONS OF PARTS BUTTON FOR SUCTION HOSE REMOVAL RUG/FLOOR SELECTOR HANGER ACCESSORY SUCTION HOSE DUST-FULL INDICATOR POWER CONTROL SWITCH* & ON/OFF SWITCH CARRYING HANDLE&... -
Page 4: Power Cord
ASSEMBLING THE VACUUM-CLEANER READY FOR USE 1) Connect the suction hose to the suction tube. 3) Connect the nozzle to the suction tube. 4) Grip the body connector with one hand and squeeze the tube in an inward direction. POWER CORD 1) PULLING OUT The power cord is long enough to be drawn out for convenience. -
Page 5: Using The Accessories
With the cord plugged into an electrical outlet, start or stop the vacuum cleaner by pushing lightly downward on the switch. NOTE : ON/OFF switch is combined with POWER CON- TROLLER - To start or stop the unit just lightly press it downward. - Page 6 USING & ASSEMBLING THE STRAP This appliance is designed to be conveniently carried on your waist using the belt-strap accessory. When cleaning steps, curtains, shelves, etc, you can carry the unit with the strap over your shoulder. Ready for use 1) Insert the lockers into the holes on the cleaner, taking care of the lockers’...
-
Page 7: Replacing The Dust Bag
Located on the top rear side of the vacuum-cleaner, there is a nozzle support that can be used to park the nozzle during pauses in cleaning. TRANSPORTING AND STORING THE VACUUM CLEANER For easy storage and transportation, this vacuum cleaner has a clip system built onto the body, which will keep the tube, hose and nozzle in a vertical position. -
Page 8: Troubleshooting
OUTLET FILTER 1) Open the grille part, separate the exhausted filter. NOTE: The filters must be completely dried before being replaced in the dust compartment. USAGE OF FLOOR NOZZLE FOR RUG / FLOOR SELECTOR Before use make sure that the position of the selector is in the right position for the type of surface to be cleaned.