Tosot TW09HQ3D6DI Owner's Manual page 17

Introduction for buttons on remote controller
Attention: When displaying the outdoor ambient, the displaying range is 0-60℃
When it goes beyond the range, it keeps the threshold data (the smallest—0℃
and the largest 60℃).
Warm tips: When operating buttons on the cover please make sure the cover is
closed completely.
Note:
Outdoor temperature display is not available for some models. At that time,
indoor unit receives "
11
button
/
Press this button to achieve the on and off of health and scavenging functions in
operation status. Press this button for the first time to start scavenging function;
LCD displays "
avenging functions simultaneously; LCD displays "
for the third time to quit health and scavenging functions simultaneously. Press the
button for the fourth time to start health function; LCD display "
tton again to repeat the operation above.
NOTE: This function is applicable to partial of models.
12
I FEEL button
Press this button once, to turn on the I FEEL function, then the figure of "I FEEL"
will be displayed, after every press of other function button, every 200ms to send
I FEEL once, after this function started, the remote controller will send temperature
to the main unit in every 10 minutes. When repress this button, this function will be
turned off. When I FEEL function is turned on, the remote controller should be put
within the area where indoor unit can receive the signal sent by the remote controller.
13
LIGHT button
Press this button at unit On or Off status, Light On and Light Off can be set up.
After powered on, Light On is defaulted.
14
WiFi button
When WiFi function is turned on, " WiFi " icon will be displayed on the remote
controller; when WiFi function is turned off, " WiFi " icon will disappear.
How to turn on WiFi：Press " WiFi " button to turn on WiFi function.
How to turn off WiFi：Hold " WiFi " button for 5s to turn off WiFi function.
Under off status, press "MODE" and " WiFi " buttons simultaneously for 1s, WiFi
module will restore factory settings.
● This function is only available for some models.
" signal, while it displays indoor set temperature.
" . Press the button for the second time to start health and sc-
" and "
12
". Press this button
" . Press this bu-