Tosot TW09HQ3D6DI Owner's Manual page 15

Introduction for buttons on remote controller
3
MODE button
Press this button, Auto, Cool, Dry, Fan, Heat mode can be selected circularly. Auto
mode is default while power on. Under Heat mode, the initial value is 28 ℃(82
Under other modes, the initial value is 25 ℃(77℉).
(only for cooling and heating unit. As for cooling only unit, it won't have any action
when it receives the signal of heating operation.)
4
+/- button
Press " + " or " - " button once increase or decrease set temperature 1°C(°F).
Holding " + " or " - " button, set temperature on remote controller will change
quickly. On releasing button after setting is finished, temperature indicator
on indoor unit will change accordingly.
When setting TIMER ON, TIMER OFF or CLOCK, press " + " or " - " button to
adjust time. (Refer to CLOCK, TIMER ON, TIMER OFF buttons)
5
TURBO button
Under Cool or Heat mode, press this button can turn on or turn off the Turbo function.
After the Turbo function turned on, the signal of Turbo will display. The signal will
be automatically cancelled if changing the mode or fan speed.
6
button
Press this button to set left & right swing angle cycling as below:
7
button
Press this button to set swing angle, which circularly changes as below:
This remote controller is universal. If it receives threes kinds of following status, the
OFF
OFF
10
AUTO COOL
FAN HEAT
)
℉
DRY