Connecting To Disposal With No Air Gap; Connecting Waste Tee With No Air Gap; Connecting To Disposal Or Waste Tee With Air Gap; Connecting Without Air Gap - LG LUDP8997SN Service Manual

NOTE
dishwasher will not be able to drain properly.
Connecting to Disposal with No Air
Gap
1 Remove the knockout plug with a hammer and
screwdriver.
2 Attach the drain hose to disposal with the hose
clamp provided. Move into position and tighten
the hose clamp.
Connecting Waste Tee with No Air
Gap
1 Remove the knockout plug with a hammer and
screwdriver.
2 Attach the drain hose to waste tee with the hose
clamp provided. Move into position and tighten
the hose clamp.
Connecting to Disposal or Waste Tee
with Air Gap
1 Remove the knockout plug with a hammer and
screwdriver.
2 Connect end of the drain hose to the air gap with
hose clamp provided. This avoids water being
siphoned from the tub.
Knockout plug
3 Attach the rubber connector to disposal or waste
tee with the hose clamp provided. Move into
position and tighten the hose clamp.

Connecting without Air Gap

The height of the drain hose end must be at least 12"
(305 mm) and within 40" (1016 mm) from the base of
the appliance to avoid water being siphoned from the
tub.
12"
(305 mm)
min.
Drain pipe
- 69 -
For Authorized Service Technicians
Air gap
Rubber hose
connector
Drain hose
40"
(1016 mm)
max.