Installation Instructions; Preparing Cabinet Opening - LG LUDP8997SN Service Manual

Hide thumbs Also See for LUDP8997SN:
Table of Contents

Advertisement

8. INSTALLATION INSTRUCTIONS

Preparing Cabinet Opening

dishwasher opening. An opening may be needed
on both sides to route plumbing and electrical
connections.
24" (610 mm) min.
33 /
1
" (851 mm) min.
2
24" (610 mm) min.
1
Select a location as close to the sink as possible
for easy connections to water and drain lines.
2
dishwasher no more than 12 ft. (3.65 m) from
the sink.
3
minimum of 2" (50 mm) between the dishwasher
and the adjacent wall.
4
To allow for proper clearance of plumbing and
literature to determine the clearance on the side
of the cabinet where the cabinet meets the back
wall. Using a 2
1
/
2
in the target area as shown on the template.
WARNING
Don't use existing holes unless they are in the
drain hose may be damaged by being crushed
or kinked.
CAUTION
Failure to properly locate the hole for the water
and drain lines may prevent the dishwasher from
in kinked or damaged lines. Installation damage
by improper installation may result in property
damage.
cabinet brace inside the cabinet.
9
4
- 63 -
For Authorized Service Technicians
Cabinet brace

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ldt7797stLdp6797stLdp5676bdLdt5665stLdf5545stLsdf9897 ... Show all

Table of Contents