Maintenance & Care - Bissell STAINEXPERT 5 User Manual

Maintenance & Care
Machine Care
For best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete.
1. Turn power OFF. Unplug the machine and
wrap the power cable.
2. After emptying the 2-in-1 Water Tank, rinse it
with running hot tap water, taking care to clean
underneath and around the heavy-duty bladder.
Clean out red lint screen. Removable Nozzle may
be rinsed if necessary. Refer to page 8.
3. Replace the 2-in-1 Water Tank on the machine.
4. Any loose hair or debris can be pulled from
the Brush Roll and thrown away.
5. To clean attachments, remove from hose and
rinse in clean, running water. Dry before storing.
Clean the hose by suctioning clean water from
a bowl. Before wrapping back on machine, lift
end of hose and stretch out to ensure all water is
cleared from hose. Refer to page 9, illustrations
11 and 12.
6. Wipe the machine's exterior with a soft cloth.
7. After carpet is dry, vacuum again to remove
hair and fuzz.
Machine Storage
Put the machine away in a closet or basement
for the next use. Store machine in a protected,
dry area. Since this product uses water, it must
not be stored where there is a danger of freez-
ing. Freezing will damage internal components
and void the guarantee.
10
www.BISSELLdirect.co.uk
WARNING
To reduce the risk of electric shock, turn power
and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
OFF