Samsung AM JNESCH Series Installation Manual page 31

Setting an indoor unit address (MAIN/RMC)
1.
Check whether power is supplied or not.
- When the indoor unit is not plugged in, there should be additional
power supply in the indoor unit.
2.
The panel(display) should be connected to an indoor unit to receive option.
3.
Before installing the indoor unit, assign an address to the indoor unit according to the air
conditioning system plan.
4.
Assign an indoor unit address by wireless remote controller.
- The initial setting status of indoor unit ADDRESS(MAIN/RMC) is "0A0000-100000-200000-300000".
Option No. : 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Option
SEG1
Explanation
PAGE
Remote
Controller
Display
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
Indication
and Details
0
Option SEG7
Explanation
PAGE
Remote
Controller
Display
Indication Details
Indication
and Details
1
CAUTION
SEG2 SEG3
Mode Setting Main address
No Main
0
address
Main
A
address
1
setting
mode
SEG8 SEG9
Setting RMC address
Indication Details
__
No RMC
0
address
RMC
address
1
setting
mode
ENGLISH-31
SEG4 SEG5
100-digit of indoor 10-digit of indoor
unit address unit
0~9 100-digit 0~9
SEG10 SEG11
Group channel(*16)
Indication Details Indication Details
__
RMC1
Indoor Unit
SEG6
The unit digit of
an indoor unit
A unit
10-digit 0~9
digit
SEG12
Group address
0~F RMC2 0~F