Table of Contents
Advertisement
WARNING
After securing a child restraint sys-
●
tem, never adjust the seat.
When a junior seat (booster seat) is
●
installed, always ensure that the
shoulder belt is positioned across
the center of the child's shoulder.
The belt should be kept away from
the child's neck, but not so that it
could fall off the child's shoulder.
Follow all installation instructions
●
provided by the child restraint sys-
tem manufacturer.
Child restraint system fixed
with ISOFIX lower anchor-
ages
■
ISOFIX lower anchorages
(ISOFIX child restraint system)
Lower anchorages are provided for
the outboard second seats.
■
Installation with ISOFIX lower
anchorages (ISOFIX child
restraint system)
Install the child restraint system in
accordance to the operation man-
ual enclosed with the child restraint
system.
If the child restraint system on hand
is not within the "universal" cate-
HIGHLANDER HV_GE
HIGHLANDER HYBRID_OM_General_OM48K22E
1-2. Child safety
gory (or the necessary information
is not in the table), refer to the
"Vehicle List" provided by the child
restraint system maker for various
possible installation positions, or
check the compatibility after asking
the retailer of the child seat.
(P.42, 43)
1
Adjust the seatback angle to the
most upright position.
When installing a forward-facing child
seat, if there is a gap between the child
seat and the seatback, adjust the
seatback angle until good contact is
achieved.
2
If the head restraint interferes
with your child restraint system,
and the head restraint can be
removed, remove the head
restraint. Otherwise, put the
head restraint in the upper most
position. (P.133)
3
Check the positions of the exclu-
sive fixing bars, and install the
child restraint system to the
seat.
The bars are installed in the clearance
between the seat cushion and
49
1
Advertisement
Table of Contents
