Adjusting The Seat Belt Shoulder Anchor Height (Front Seats); Seat Belt Pretensioners (Front Seats) - Toyota Highlander Hybryd Owner's Manual

Table of Contents

Advertisement

2
To release the seat belt, press
the release button
When not using the rear seat belts
Pass the outer seat belts through the
seat belt hangers and secure the seat
belt plates to prevent the shoulder belts
from being damaged.
Second seat belts
Third seat belts
Adjusting the seat belt
shoulder anchor height
(front seats)
1
Push the seat belt shoulder
anchor down while pressing the
release button
HIGHLANDER HV_GE
HIGHLANDER HYBRID_OM_General_OM48K22E
2
Push the seat belt shoulder
anchor up.
.
Move the height adjuster up and down
as needed until you hear a click.
Adjustable shoulder anchor
Always make sure the shoulder belt is
positioned across the center of your
shoulder. The belt should be kept
away from your neck, but not falling
off your shoulder. Failure to do so
could reduce the amount of protection
in an accident and cause death or
serious injuries in the event of a sud-
den stop, sudden swerve or accident.
Seat belt pretensioners
(front seats)
The pretensioners help the seat
belts to quickly restrain the occu-
pants by retracting the seat belts
when the vehicle is subjected to
certain types of severe frontal or
side collision.
The pretensioners do not activate in the
event of a minor frontal impact, a minor
side impact, a rear impact or a vehicle
rollover.
Replacing the belt after the
pretensioner has been activated
.
If the vehicle is involved in multiple colli-
1-1. For safe use
WARNING
27
1

Advertisement

Table of Contents
loading

Table of Contents