Advertisement
G L A D I U S
THE MULTIFUNCTIONAL GRINDING SWORD
C
3
4
1 8 0 0
®
D
E
3a
3
www.111abrasives.com.au
Phone (07) 5546 6026 Fax: (07) 5546 6381
Adjusting the belt (rear)
To adjust the grinding / polishing belt, here
are the following tools that are included
when the machine is shipped:
1 x Hexagon socket screwdriver (D)
-
1 x Hexagon socket key SW 5 (E)
-
1 x Hook wrench (C)
-
1. Start the machine (speed control on level "C")
2. Loosen screw 3
3. Turn screw 4 in direction of arrow until the
grinding / polishing belt is in its desired position
4. Tighten screw 3 as well as screw 3a
If there is still adjustment necessary, please repeat
steps 2 to 4.
Advertisement
