To Charge The Battery Pack - Sony BC-TRX Operating Instructions Manual

English
Thank you for purchasing the Sony Battery charger.
Before operating this Battery charger, please read this manual thoroughly
and retain it for future reference.
• The BC-TRX battery charger can only be used to charge lithium
ion type battery packs (type X/type N/type G/type D/type K) and
"InfoLITHIUM" battery packs (type G/type D/type T/type R).
• Designed for use with compatible Sony battery packs.
• This unit cannot be used to charge a nickel cadmium type or nickel
metal hydride type battery pack.
• "Info LITHIUM" is a trademark of Sony Corporation.
f.t.11i]l)ldentifying the parts
[j]
Switching lever
[g]
Output switch
rnJ
A
mark
~
Battery type mark
[§]
Power plug
[§] Battery A mark
[1]
Battery pack
[ID
CHARGE lamp
[ID
Charging status indicator lamp
IIQ]
USB rechargeable device (Digital
camera, etc.)
[j)
Supplied Micro USB cable or
other USB cable compatible with
your device
To Charge the Battery Pack
The battery pack is charged by attaching it to this unit.
1 Set the output switch of this unit to "BATTERY
CHARGE'~
2 Attach the battery pack.
Before attaching
When using a type N, D, T, R or K battery pack, do the following steps
before attaching it to this unit.
*
If you use a type X or type G battery pack, you do not need the
following procedure.
Lift the switching lever up. (See illustration r.i!-1)
. Press the switching lever to the point marked 0 on the illustration
until it clicks. (See illustration Fa-2)
How to attach the battery pack
Align the A mark on the battery pack in the direction of the
A
mark
on the charger and insert it. (See illustration 6)-1)
(The battery pack illustrated is type X.)
• Attach the battery pack with its A mark facing up.
When attaching a type X or K battery pack, insert it along the left
·side of the attachment part of this unit as shown by the arrow
CD
in
illustration
m-2.
After fully inserting it, press lightly in the direction of the arrow until
the CHARGE lamp lights up. (See illustration 6)-3)
3 Lift the power plug and connect it to a wall outlet (wall
socket).
Always connect the power plug with the prongs at the top. (See
illustration
[!I)
Do not connect the power plug with the prongs at the bottom. (See
illustration
D])
The CHARGE lamp (orange) lights up and charging begins.
The CHARGE lamp
goe~
out when the battery pack is about 90
%
charged.