Advertisement
Available languages
Available languages
Problem
Is too noisy.
Does not have a
smoothly rotating
nozzle.
Water won't
pump out of the
dishwasher.
Has a bent upper
rack after loading
dishes.
Cannot close the
door.
DW4000RM_DW50T6060US_AA_DD81-03054A-00_EN.indd 33
Possible cause
Sound is generated when the
dispenser cover is open and
the drain pump is operating
in an early stage.
The dishwasher is not level.
Foreign material (a screw, a
plastic piece) is in the pump
chamber.
There is a 'chopping' sound
because a nozzle is bumping
against the dishes.
The nozzle holes are clogged
with food particles.
The nozzle is blocked by a
dish or pot and cannot rotate.
The drain is clogged.
The dishes are not loaded
properly.
Auto Release™ Dry mode is in
operation.
Solution
• This is normal operation.
• Ensure the dishwasher is level.
• Contact a qualified service
technician to remove foreign
material from the pump chamber.
• Rearrange the dishes.
• Clean the nozzle hole. See page
25.
• After placing the dishes into the
racks, rotate the nozzles by hand
to check whether any of the
dishes interfere with them.
• Contact a qualified service
technician to remove any
obstruction from the drain
hose and check the drain pump
operation.
• Load your dishes as
recommended. (See pages 18 to
19)
• Once the door opens in the Auto
Release™ Dry mode, the door
cannot be closed manually for the
next 2 minutes. You may close
the door after 2 minutes.
English
33
2020-05-08
2:15:13
Advertisement
