Advertisement
Testing the Housing
1.
Assemble the housing without a camera installed.
Submerge the housing in fresh water for several minutes.
2.
Remove the housing from water and dry the outside of
3.
the housing with a clean, lint-free cloth.
4.
Look through the back of the housing for signs that water
has entered the housing. Signs include fogging or water
droplets.
5.
We recommend making at least one dive without a
camera installed to ensure waterproof operation.
Maintenance and Storage
Post-Dive
1.
Rinse the housing with in clean, fresh water.
2.
NEVER leave your housing in the fresh water rinse tank.
Collisions with other gear can cause scratches or damage
to your equipment.
3.
Dry the housing and viewfinder with a clean micro fiber
lens cleaning cloth.
Attach the protective cap.
4.
Stow the housing in a shaded place where it is protected
5.
from impact or overheating. If no shade is available, we
recommend covering the housing with a towel or cloth.
Travel and Storage
1.
Clean and dry the exterior of the viewfinder. Do not use
any type of alcohol or glass or surface cleaner on the
viewfinder.
2.
Attach the protective cover.
3.
Store in a cool, dry place.
Limited Warranty
This Ikelite product is warranted against any manufacturing
defects for a period of one (1) year from the original date
of purchase. To obtain warranty service, the product must
be returned to Ikelite postage paid. Ikelite will, at its sole
discretion, repair or replace such products, and will return
to customer postage paid. All other claims of any nature are
not covered. Except as mentioned above, no other warranty
expressed or implied applies to this Ikelite product.
Contact Us
Ikelite Underwater Systems
50 W 33rd St
Indianapolis, IN 46208 USA
(317) 923-4523
ikelite@ikelite.com
Advertisement
