Table of Contents
Advertisement
Observed Fault
Tension pins
regularly
breaking
F:\C - E\ECOMAX\COAL BOILER\Instructions and Manuals\Coal Boiler Manual Rev 6.doc
Page 32 of 36
Possible Cause
Seam of coal
with too many
stones
Coal Feed
Screw worn
Solution
Stones can be present in the fuel from the
supplier or be picked up during transport.
Remove coal screw and check for wear,
especially the first 100mm at the end of the
screw under the Burn Pot. If there is excessive
wear it will need to be replaced.
Advertisement
Table of Contents
