Advertisement
After the system has reached the firmware standby state, enter the activation
8.11
code for the Virtualization Engine technologies.
1.
In the navigation area, expand
Click
CoD Activation
2.
Enter the activation key into the field. This key was included with the printed
3.
material inside your system box.
4.
Click
Continue
Change the partition mode.
8.12
In the navigation area, expand
1.
Click
2.
Power On/Off System
3.
Select
Boot to SMS menu
4.
Select
Running
5.
Click
Save settings and continue system server firmware boot
Open a terminal session on the PC, using an application such as
8.13
HyperTerminal, and wait for the SM's menu to appear. Be sure the line speed
is set to 19,200 bits per second to communicate with the system.
Change the partition mode back so that the server continues to load the operating
8.14
system during startup.
In the ASMI navigation area, expand
1.
Click
2.
Power On/Off System
3.
Select
Continue to operating system
4.
Click
Save settings
8.15
Insert the Virtual I/O Server CD into the optical drive of the system.
TM
On Demand Utilities
.
. The Advanced POWER Virtualization feature is enabled.
Power/Restart Control
.
in the AIX/Linux partition mode boot field.
in the Boot to system server firmware field.
.
.
.
.
Power/Restart Control
in the AIX/Linux partition mode boot field.
.
.
Advertisement
