Advertisement
Quick Links
All Restoration Hardware bunk beds are designed to meet the highest safety
standards and comply with all U.S. and Canadian Bunk Bed regulations.
Assembly Instructions Bu
n
Model No: RH298KBK
Made In China
"Chesterfield Bunk Bed With Ladder On Right/Left "
Restoration Hardware Baby & Child
11640 Harre remove ektra 1 Street Suite B
Mira Loma, CA 91752
www.rhbabyandchild.com
Distributed in Canada by:
Restoration Hardware Canada, Inc.
1500-1005 West Georgia Street,
Vancouver, British Columbia V6E 4N7
!
WARNING: Read all instructions before assembling
this product. KEEP INSTRUCTIONS FOR FUTURE USE.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact us first. You
can also order parts writing to the address above. Include the product model number,
color, and a brief description of the part. Call 1-800-762-1751
CARE AND CLEA
NINGCAGCARE AND CLEANING
DO NOT use abrasive chemicals for cleaning. Dust often using a clean, soft dry cloth
Dab spills quickly with a soft cloth. Vacuum to remove dust.
If the Bunk Bed is to be stored, store in a cool dry place and carefully package all original
hardware to protect from loss.
Page 1 of 11
Advertisement
Related Manuals for baby&child Chesterfield Bunk Bed With Ladder On Right/Left RH298KBK
Summary of Contents for baby&child Chesterfield Bunk Bed With Ladder On Right/Left RH298KBK
- Page 1 All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. Assembly Instructions Bu Model No: RH298KBK Made In China “Chesterfield Bunk Bed With Ladder On Right/Left “ Restoration Hardware Baby &...
- Page 2 IMPORTANT SAFETY INFORMATION FOR BUNK BED Follow the information on the WARNINGS appearing on the upper bunk end structure and on the carton. Do not remove warning label from bed. Always use the specified size mattress, to help prevent the likelihood of entrapment or falls. Surface of mattress must be at least 5 inches below the upper edge of guardrails on top bunk.
- Page 3 PARTS INCLUDE 4 pcs Page 3 of 11...
-
Page 4: Hardware List
HARDWARE LIST HARDWARE LIST TOOLS NEEDED: Screwdriver Phillips (Not included) ASSEMBLY INSTRUCTION Note: -Bed must be assembled by at least two people. -Please read instructions carefully before assembling bed. -Use the above parts and fittings list to identify each component. -Keep all packing materials until assembly is complete to avoid loss of smaller parts. - Page 5 Process: Step 1: Insert the Allen Head Bolt (N) into the holes on the Left Bunk End (1) and Right Bunk End (2). Stand the Left Bunk End (1) and Right Bunk End (2) upright and attach Bottom Side Rail (3). Page 5 of 11...
- Page 6 Step 2: Attach Top Side Rail (4) to Left Bunk End (1) and Right Bunk End (2). Insert the Threaded Rods (A) into the holes on the end of Front Side Rail (4), and insert Curved Washers (B), Spring Washers (C), and Nuts (D) onto the Threaded Rods (A) to attach the Left Bunk end (1) and Right Bunk End (2).
- Page 7 Step 3: Attach Back Guard Rail (5) to Left Bunk End (1) and Right Bunk End (2), by using the Allen Key (I) to tighten Allen Head Bolts (J) and Big Flat Washers (K); Step 4: Attach Front Guard Rail (6) with Allen Head Bolts (J) and Big Flat Washers (K). For Bunks with Ladder on Left side, attach Front Guard Rail (6) to the Right Bunk End (2), so ladder sits on Left.
- Page 8 Step 6: Lay the Slat Roll (9) in bewteen the Top Side Rail (4) and Back Side Rail (3), then tighten with Big Screws (F). -The webbing on the slats should be on the bottom side. -Numbers on the slat roll show the locations to tighten the Big Screws. Page 8 of 11...
- Page 9 Step 7: Lay the Panels (8) on top of the Slat Roll (9). - Numbers on the panel show the locations to tighten the Medium Screws. Page 9 of 11...
- Page 10 Step 8:Attach Ladder (7) toTop Side Rail (4) and Bottom Side Rail (3), then tighten with Small Screws (L) and Small Flat Washers (M). Page 10 of 11...
- Page 11 Step9: Install Bedding: BEDDING SPECIFICATION: The following size mattress and Foundation are specified for use with this Bunk bed; MATTRESS:53-1/2”W×74” to 75”L×Maximum 7”H PLATFORM PANEL:CONSISTING OF 4 PANELS(74.8”W×26.6”L×0.7”H) Note: MATTRESS AND PLATFORM PANEL MUST NOT EXCEED 9” TOTAL THICKNESS. Be sure to adhere to these BEDDING SPECIFICATIONS in order to avoid the possibility of falling or entrapment.
Need help?
Do you have a question about the Chesterfield Bunk Bed With Ladder On Right/Left RH298KBK and is the answer not in the manual?
Questions and answers