Adjusting The Amount Of Flash Light - Samsung NX5 User Manual

Taking a picture in a dark place
Adjusting the amount of flash light
When setting a fl ash option, you can adjust the
brightness of the flash.
1
In the Shooting mode, press [MENU].
2
Select Shooting 2 (
3
Press the [Fn] button after selecting a
57
desired item.
4
Adjust the brightness of the fl ash by
rotating the dial or pressing [
• You can adjust fl ash brightness by ±2
) → Flash.
2
levels.
1
Flash Exposure Value
MENU
Back Reset
• If the subject is too close, the ISO sensitivity is
• The Flash Brightness Adjustment function is not
• If an external fl ash unit has a flash control
• If the distance from the subject is quite close
/ ].
• If you've installed a lens hood, the hood can
Display
the level of
flash light
adjustment
high, or the exposure value is too large or small,
the adjustment effect will be reduced.
available in some shooting modes.
function, the light control value of the external
flash is applied when you connect it to the
camera.
when taking images by using the built-in flash,
part of the images may appear dark as the lens
is interfered with the flash light. Please check
the distance between camera and subject when
taking pictures. The distance interfered with
flash light may vary by the type of lens in use.
block light from the built-in flash. Please remove
the lens hood when using the built-in flash.