Table of Contents
Advertisement
Taking a picture in a dark place
The function can be set directly by pressing [Fn] in the shooting mode.
Using the flash popup button
The flash operates when you pop-up the built-in flash
by pressing the flash button. When the flash is closed,
it will not burst out the light and the
and
55
1
In the Shooting mode, press [ ].
2
Align your subject in the frame and half-
press [Shutter] to focus.
3
Press [Shutter] to take a photo.
• Even if you have opened the flash using
modes support automatic popup and flash light.
the 'Flash' button, the flash will not work if
you have the Flash Option in the menu set
to Off.
Setting the flash option
If a picture is taken in a dark place, the picture may
,
,
,
appear to be dark since the light source is not sufficient.
Press [
1
In the Shooting mode, press [MENU].
2
Select Shooting 2 (
an option.
Flash button
Smart Flash
SMART
Auto+Red
Fill-in Red
1st Curtain
2nd Curtain
] to pop up the flash.
) → Flash →
2
Off
The flash light doesn't operate.
The camera automatically adjusts the brightness
of the flash according to the amount of light in the
surrounding environment.
The flash light operates automatically in the dark place.
Auto
The flash light operates automatically and
prevents the red-eye effect.
• The flash operates whenever you take a picture.
Fill in
• The brightness of the flash is automatically
controlled.
The flash operates whenever you take a picture
and prevents the red-eye effect.
The flash operates immediately after the shutter
opens.
The flash operates just before the shutter closes.
• You can take a better picture if the subject is
located within the operational range of the flash.
(Refer to the Guide Number in "Specification,")
• You can set the auto flash option for external
flashes on the NX-series models only.
• The flash options available differ, depending on
the shooting modes.
Advertisement
Table of Contents
