Remote Control - Prolyte PRO LYFT AETOS PAE-C4DC-10 User Manual

7. LINKING CONTROLLERS
Controllers can be linked with a data link cable connected
from the link-out of controller 1 to the link-in of controller 2
etc. Maximum 10 controllers can be linked.
Controller 1 will act like a MASTER controller. The UP and
DOWN button on this controller will operate all selected
hoists on the linked controllers. Selecting and deselecting
INTRODUCING THE PROLYFT AETOS RANGE
must be done on every individual controller.
8.

REMOTE CONTROL

When Simplicity in Motion is the ultimate goal, there's always a next level to
meet. ProLyft invites you to take that level further with a product range that is fit
Connecting the remote control
to meet the future
The remote control must be connected to the link-in
connector of the first controller. This controller will be
Get Ready for the Next Level
connected to the first channels on the remote control.
ProLyft AETOS is the brand new ProLyft hoist range. The AETOS range is fully
Any next controller linked to the first controller will be
equipped to meet future demands in lifting equipment and offers clever features
connected to the next available channels on the remote.
and carefully engineered product attributes. The AETOS range comprises of a
Up to 24 channels.
standard 500kg and 1000kg hoist and will be expanded in the near future.
Operating from the remote control
The Unique ProLyft Program
The remote control functions in exact the same way as
ProLyft sustains a unique service programme on its complete hoist range,
the frontpanels of the controllers.
developed to offer maximum service and support for all hoist owners.
The UP/DOWN/SELECT and DESELECT buttons on the
This program encompasses:
left and right side have exact the same functionality. It
• Installed network of trained and certified Service Points
makes it possible to make the remote left and right hand
operated.
• Lifetime warranty
When a remote is connected, the UP/DOWN buttons on
• Individual identification - easy web-enabled track and trace functions
the controllers are disabled.
• ProLyft Service database – automatic reminders for re-certification
• Test certificates worldwide available for owners of every hoist
LED indication on remote control
Pressing any E-stop on a controller or a breaker trip on
Standard Features of the AETOS Range:
one of the controllers will cause the LED's of the affected
• Available in a 500kg and a 1000kg hoist body
channels to blink.
• Fixed speed of 4m/min
• Red CEE form plug 16Amp 4pin and cable with strain relief
for power connection
• Yellow CEE form plug 16Amp 4pin and cable with strain relief
for low voltage control (optional)
• Equipped with limit switches on all hoists
• End limit switches are activated by chain stop for 100% repeatable accuracy
and easy of use
• External limit switches can be used for hoists used above a grid or false ceiling
• Multiple voltage motor
• Chain bags for 30mtr up to 80mtr available
• 5-pocket load wheel
• Zinc-plated load chain
• 100% sealed aluminium transmission house without oil plugs
• Standard swivel hook on hoist body and hoist chain
• IP 55 protection
Easily Adaptable:
• Covers 180 degree rotatable for motor-up use
• Easy mounting of optional second brake
• Brake shaft and electronics prepared for second brake
• Output shaft prepared for rotary limit switch or encoder connection
• All hoists can be double reeved
• Swivelling chain bag bracket for motor-down and motor-up use
• Multiple voltage motor
AETOS Range
page ! 8
WWW.PROLYTE.COM