Prolyte PRO LYFT AETOS PAE-C4DC-10 User Manual page 6

LINK-IN CONNECTOR
INDICATION LED'S
INTRODUCING THE PROLYFT AETOS RANGE
When Simplicity in Motion is the ultimate goal, there's always a next level to
meet. ProLyft invites you to take that level further with a product range that is fit
to meet the future
Get Ready for the Next Level
ProLyft AETOS is the brand new ProLyft hoist range. The AETOS range is fully
equipped to meet future demands in lifting equipment and offers clever features
and carefully engineered product attributes. The AETOS range comprises of a
standard 500kg and 1000kg hoist and will be expanded in the near future.
The Unique ProLyft Program
ProLyft sustains a unique service programme on its complete hoist range,
developed to offer maximum service and support for all hoist owners.
This program encompasses:
• Installed network of trained and certified Service Points
• Lifetime warranty
• Individual identification - easy web-enabled track and trace functions
LINK-OUT CONNECTOR
• ProLyft Service database – automatic reminders for re-certification
• Test certificates worldwide available for owners of every hoist
Standard Features of the AETOS Range:
• Available in a 500kg and a 1000kg hoist body
• Fixed speed of 4m/min
• Red CEE form plug 16Amp 4pin and cable with strain relief
4. FRONT PANEL
for power connection On the front panel you will find the following items:
• Yellow CEE form plug 16Amp 4pin and cable with strain relief LINK-IN CONNECTOR:
LINK-OUT CONNECTOR:
for low voltage control (optional)
INDICATION LEDS:
• Equipped with limit switches on all hoists
• End limit switches are activated by chain stop for 100% repeatable accuracy
and easy of use
• External limit switches can be used for hoists used above a grid or false ceiling
• Multiple voltage motor
LIGHT SENSOR
• Chain bags for 30mtr up to 80mtr available
EMERGENCY STOP
• 5-pocket load wheel
DESELECT SWITCH
• Zinc-plated load chain
CHANNEL SELECTION
• 100% sealed aluminium transmission house without oil plugs
CHANNEL INDICATOR
• Standard swivel hook on hoist body and hoist chain
SELECT SWITCH
• IP 55 protection
UP SWITCH
DOWN SWITCH
Easily Adaptable:
• Covers 180 degree rotatable for motor-up use
5. REAR PANEL
• Easy mounting of optional second brake
On the rear panel you will find, from left to right:
• Brake shaft and electronics prepared for second brake
OUTPUT CONNECTOR 1:
• Output shaft prepared for rotary limit switch or encoder connection
OUTPUT CONNECTOR 2:
• All hoists can be double reeved OUTPUT CONNECTOR 1:
BREAKER 1
• Swivelling chain bag bracket for motor-down and motor-up use
BREAKER 2
• Multiple voltage motor
BREAKER 3
POWER CONNECTOR
NAME PLATE
EMERGENCY STOP BUTTON
LIGHT SENSOR
DESELECT SWITCH
THUJA network input connector
THUJA network output connector
POWER
OPERATIONAL
BREAKER 1 TRIP
BREAKER 2 TRIP (8 and 12 channel only)
BREAKER 3 TRIP (12 channel only)
Sensor measuring the environment light, in order to adjust the light output of the LED's
Emergency Stop button
button to deselect all selected channels at once.
individual hoist channel selection buttons
LED indicating the status of the channel
button to press and hold in order to enable the select mode
Starting button to move the selected hoist(s) in the UP direction
Starting button to move the selected hoist(s) in the DOWN direction
Output connector for hoist 1 to 4
Output connector for hoist 5 to 8 (8 and 12 channel only)
Output connector for hoist 9 to 12 (12 channel only)
Circuit breaker for hoist 1 to 4
Circuit breaker for hoist 5 to 8 (8 and 12 channel only)
Circuit breaker for hoist 9 to 12 (12 channel only)
Mains power connector
Sticker with serial number, voltage and CE mark
AETOS Range
HOIST CHANNEL SELECTION
CHANNEL INDICATOR
page ! 6
SELECT SWITCH
UP SWITCH
DOWN SWITCH
WWW.PROLYTE.COM