PM5-SA4
1
Identification of safety information
Please refer to the information concerning the identification of safety
information in your PoolManager
or Analyt user manual.
®
2
General safety information
HAZARD!
Please
follow
the
in your PoolManager
3
User qualification
Please refer to the different user qualifications as defined in your
PoolManager
®
or Analyt user manual.
4
Overview
The PM5-SA4 Converter 4-20mA is a plug-in module for the BAYROL
Measuring, Control und Dosing Systems PoolManager
the 5th generation (from 2012). It provides 4 standard current outputs
4-20mA, which can be used to transmit the current measurement
readings to external systems, e.g. Building Management Systems
(BMS), remote displays or data loggers.
5
Required PoolManager
NOTE
Required PoolManager
current version of the PM5-SA4 converter
In order to use the current version of the PM5-SA4
converter (see figure below) in a PoolManager
controller, at least the following software version (or
later) must be installed on the controller:
v140325-M1 (5.3.0)
If necessary, please perform a software update with a
USB memory stick, as described in the PoolManager
manual.
4
general
safety
information
®
or Analyt user manual carefully.
®
and Analyt of
Software Version
®
®
software version for the
®
®
NOTE
Required PoolManager
software version for the
®
earlier version of the PM5-SA4 converter
In order to use the earlier version of the PM5-SA4
converter (see figure below) in a PoolManager
controller, at least the following software version (or
later) must be installed on the controller:
v130312-M1 (4.0.0)
If necessary, please perform a software update with a
USB memory stick, as described in the PoolManager
manual.
®
®