Pumpables Genie Plus Full Manual page 16

Change Cycle Speed in Expression Mode
In expression mode, you can choose
one of three cycle speeds for each
vacuum level.
Create Your Own Program
Press the Power button for 2 seconds
to activate the Memory function. The
Memory icon will start flashing, and the
pump will start recording your pump-
ing session.
cy:08
2
Hold the + button for 1 sec. and the
speed will appear on the screen. Press
and hold the + button again for 1 sec.
to increase the speed for the current
vacuum level. Press and hold the -
button for 1 sec. to decrease the speed
for the current vacuum level.
00:46
3
Adjust the settings during your pump-
ing session as best suits you.
Press the Power button for another 2
seconds to stop recording.
The Memory icon in the screen shows
that your program has been stored.
cy:08
2
14