KTM 200 Duke 2017 Owner's Manual page 112

13 WHEELS, TIRES
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
–
Remove the rear wheel.
Main work
–
Check bearing
» If the bearing is damaged or worn:
–
Change the bearing.
–
Check the rubber dampers
» If the rubber dampers of the rear hub are damaged or worn:
–
Change all rubber dampers in the rear hub.
S00677-10
–
Lay the read wheel on a workbench with the rear sprocket facing upwards and insert the
wheel spindle in the hub.
–
To check the play
Info
Measure the play on the outside of the rear sprocket.
Play in rubber dampers, rear wheel
»
If play
S00678-10
–
Change all rubber dampers in the rear hub.
Finishing work
–
Install the rear wheel.
–
Remove the rear of the motorcycle from the lifting gear. (
–
Check the chain tension. (
( p. 107)
1
.
2
of the rear hub for damage and wear.
A
, hold the rear wheel tight and try to rotate the rear sprocket.
A is larger than the specified value:
( p. 108)
p. 84)
p. 77)
≤ 5 mm (≤ 0.2 in)
p. 77)
110