Gree GMV-80WL/A-T Service Manual page 134

GREE
Removal operation of compressor
Remark: Before removing the compressor, please make sure that there's no refrigerant inside the pipeline and the power
is disconnected.
Process
2. Disconnect
compressor and
connected
pipeline
3. Loose nuts
fixing the foot of
compressor
DC Inverter Multi VRF System II Service Manual
Photo
130
Operation
Instruction
● Weld suction pipe
and discharge pipe
of compressor
● then pull out the
connection pipe
from the
compressor
Note: During
welding process, do
not let the flame
burn out other parts.
Twist off the nuts for
compressor with
wrench