Samsung SCX-6220 User Manual page 157

Laser mfp
Hide thumbs Also See for SCX-6220:
Table of Contents

Advertisement

Display
Retry Redial?
(only for SCX-6320F)
Scanner Locked
Toner Empty
Replace Toner
Toner Low
DUPLEX JAM
Function Impossible
DIMM not installed
NETWORK IP Conflict
Not Assigned
8.16
T
ROUBLESHOOTING
Meaning
The machine is waiting
for a specified time
interval to redial a
previously busy station.
The scan module is
locked.
The toner cartridge has
run out. The machine
stops.
The toner is almost
empty.
When the machine
detected the duplex jam
in the middle of 2-sided
printing.
Means that these modes
can not be worked
together or not
supported in your
current machine
configurations.
Not installed the DIMM
for Fax then will be
displayed this message
on the LCD.
An IP Conflict occurs
when your MFP's
network settings are
configured incorrectly.
Not Assigned. The
Group Mail you tried to
use has no email
assigned to it.
Solution
You can press Start to redial
immediately, or Stop/Clear
to cancel the redial operation.
Unlock the scanner (see
page 1.2) and press Stop/
Clear.
Replace the old cartridge with
new one. See page 7.3.
Take out the toner cartridge
and gently shake it. By doing
this, you can temporarily re-
establish printing operations.
Remove the jammed paper
In case of copying, try again
without function combination
.For Scan-To-Email, please
check secured connection of
the DIMM and QWERTY
keyboard
Check the DIMM in the
expanding memory slot.
*Please test the RAM testing in
engine test mode. *If the
problem in DIMM, replace the
DIMM.
Correct the network settings.
Type the email manually with
the QWERTY Keyboard/
Numeric key pad, or assign the
email.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scx-6320fScx 6320f - b/w laser - all-in-one

Table of Contents