Scanning Using Network Scan - Samsung SCX-6220 User Manual

Scanning Using Network Scan

Using this feature, you can scan a document from your machine
to a PC without touching the PC itself.
If you use SmarThru, you must start the scan procedure from
the PC, and the scanned data will go only to the PC which is
directly connected to the machine.
1
Load the document you want to scan in either the DADF or
on the document scan glass.
2
Press Network Scan.
The Network scan Idle screen shows "Netscan Login:" in the
top line of the display.
3
Customize the Original Type and Duplex settings using
the control panel buttons.
• Original Type: select Text, Text/Photo and Photo for
Black & White image type and Color for color image type.
•Duplex: select Yes for both sides of a document.
4
Enter your ID and password using the alphabet keypad, and
then press Enter.
Or, press Address Book. The display shows user id for the
entire user subscribed for the Network scan facility in
alphabet order. Select one using the scroll buttons and
press Enter.
Or, enter a set of characters or numbers and press Address
Book. The closest matching entries are shown. Select one
using the scroll buttons and press Enter.
5
Enter PIN protects your machine against unauthorized use
and press Enter.
6
Press the scroll buttons to display "Scan Preference" at the
bottom line and press Enter.
7
Choose the file type and resolution and then press Enter.
•Black & White: If you select this option, select file type
PDF or TIFF.
•Color JPE-200: If you select this option, 200 dpi
resolution and JPEG file type will be automatically
selected.
•Resolution - Select resolution 100 dpi, 200 dpi, 300 dpi
or 400 dpi.
S 6.9
CANNING
6