Media Sizes Supported In Each Mode; Changing The Tray Size - Samsung SCX-3200 Series User Manual

the warranty or service agreements.
The amount of paper put into the tray may differ according to
media type used (See "Print media specifications" on page 93).
• Using inflammable print media can cause a fire.
• Use designated print media (See "Print media specifications" on
page 93).
The use of inflammable media or foreign materials left in the printer
may lead to overheating of the unit and, in rare cases may cause a
fire.

Media sizes supported in each mode

MODE SIZE
Copy mode Letter, A4,
Legal, Oficio, US
Folio, Executive,
JIS B5, A5
Simplex For details about
printing paper size, click
the following link
("Print media
specifications"
on page 93).
Duplex Letter, A4,
printing Legal, US Folio,
Oficio
a
(Manual)
2
a. 75 to 90 g/m (20~24 lbs bond) only (See "Print media specifications"
on page 93).

CHANGING THE TRAY SIZE

The tray is preset to Letter or A4 size, depending on your country. To
change the size, you need to adjust the paper guides.
1
2
TYPE SOURCE
For details about Tray
paper type, click
the following link
("Print media
specifications"
on page 93).
For details about Tray
paper type, click
the following link
("Print media
specifications"
on page 93).
Plain, Color, Manual feeding
Preprinted, in the tray
Recycled, Bond,
Archive
1 Tray
2 Paper length guide
3
3 Paper width guide
Media and tray_ 49
1. Open front door and pinch the paper length guide and pull it out to
extend the tray.
Because the machine is very light, it can move when you open and
close the tray or install and remove the toner cartridge. Be careful
not to move the machine when performing these tasks.
2. Flex or fan the edge of the paper stack to separate the pages before
loading the paper. Insert the paper into the tray.
3. Load paper with the print side facing up. Make sure that all four corners
are flat in the tray.
Do not overload the tray. Ensure that the paper level is below the
paper capacity mark on the inside of the tray.