Table of Contents
Advertisement
7. Main Features
Supply voltage
Power supply without magnet action
Power supply with magnet action
Type E
Type R
Connection
LED lighting
Specifications of contacts
Operating temperature
Detection distances
Sn (typical distance)
Sao (ensured activation distance)
Sar (ensured rupture distance)
Offset
Holding force
R
E
Water tightness
Box/housing material
Cable or connector
Weight with packaging
Screw mounting
8. Assembly Instructions
8.1 SM1-PL and SM1-OX
a) Drill the holes of the mounting bracket at F= 4.5 mm, with a center distance of 72 mm.
b) Use the stainless steel washers supplied with the product in order to preserve the box's casing
c) With the door closed, the distance between the polar plate and the suction cup should ideally be 0.
The polar plate is flexible which makes it possible to compensate for function
d) The bending radius of the cable must be greater than 50 mm.
e) Use tamper-proof screws
8.2 SM2
a) Drill the holes of the mounting bracket at F= 6.5 mm, with a center distance of 163 mm.
b) c) d) e) Same as in §7.1
f) The transmitter can be equipped with the EPB handle. The advantage is to ensure a pulling force in
the axis of the suction cups and thus obtain the maximum force by avoiding the leverage effect.
SM1 AND SM2 SERIES
Hold and interlock
OX
670 mA
150 mA
8 x 0.25 mm²
Rmin > 50
Safety: 2 x 40 V/300 mA, Diagnostics: 40 V/300 mA
Centering and parallelism to be performed
~ 500 N
~ 400 N
IP 69K box
IP 67 connector
Stainless steel
316L
PUR polyether
1110 g
2 x M4
SM1
PL-AC
21.6 VDC to 26.4 VDC
40 mA to 24 VDC
0.21 A
0.075 A
M12 male 8 pin
baseplate
Yes
-25°C to +50°C (-13° to +122° F)
5 mm
4 mm
8 mm
~ 500 N
~ 300 N
IP 54
PA6
Cu/Ni baseplate
700 g
2 x M4
SM2
OX
1.35 A
0.3 A
8 x 0.25 mm²
Rmin> 50
No
~ 936 N
~ 820 N
IP 69K box
IP 67 connector
Stainless steel
316L
PUR polyether
2000 g
2 x M6
6
Advertisement
Table of Contents
